New Design Internal Bandage Sensor Display Receiving unit Bus Truck Trailer TPMS support RS232 interface Telematics Integration
Display Receiver Bus Truck Trailer TPMS Kits support RS232 interface Telematics Integration
Such 2 sensors are with the same features and performances,with high quality standard and widely used by many original bus truck manufacturers.
Bandage Sensors are more stable and reliable for large vehicles such as mining trucks earthmovers such as Caterpillar and Komatsu vehicles,bandage tie length can be customized for specific application.
Usually for most bus truck vehicles 1680mm bandage length will be enough,but for mining vehicles some are
more than 3 meters or 4 meters in length,if customized bandage tie length required,confirm before your purchase.
1.High quality internal bandage sensor,professional installation and longer lifetime,more reliable and safer.
2.Internal sensor bandage circled and fixed installation
3.Excellent Waterproof function with the help of sensor seal perfect workmanship.
4.Display will show tires data both tire pressure and temperature meanwhile
5.Max Support 26 wheels for bus truck vehicles.
6.With RS232 port,can be connected to GPS module or other telematic integration.
Display Receiver Function and Features;
1.Easy installation,long distance signal reception,signal stability both transmission and reception.
2.Supports up to 26 tire pressure&temperature monitoring simultaneously, cycle display tires data.
3. A variety of pressure temperature unit
selection, applicable to the world.
4. Can set the tire high pressure/low pressure/temperature alarm standard value.
5.Low pressure, high pressure,high temperature,leakage and other alarm function integration
Display Receiving Unit Parameter;
Working Frequency: 433.92MHz ±68KHz
Working Voltage: DC5V-DC12V
Maximum Working Current: ≤20mA
Quiescent Current: ≤5mA
Working Temperature: -40℃-85℃
Communication Baud Rate: 19200Kbps
Receiving sensitivity: >-105dbm
New Style of bandage sensor built-in hidden antenna for more efficient and reliable installation.
New Design Bandage Sensor Parameter
Battery Mode CR2450(550mAh)
RF Frequency 433.92 MHz±38 KHz
Standby Current:﹤0.7 uA
Emission current:﹤10 mA
High frequency transmitting power:﹤8 dbm（50Ω)
High frequency modulation mode:FSK
Low frequency receiving frequency: 125 KHz±5 KHz
Low frequency modulation mode:ASK
Pressure measurement range: 0-13 bar
Pressure resolution: 2.75 KPa
Pressure measurement accuracy
±0.2 bar(0℃~70℃)
±0.3 bar(-20℃~85℃）
±0.48 bar(-40℃~125℃)
Temperature measurement range:-40℃~125℃
Temperature resolution:1℃
Temperature measurement accuracy:±3℃(0℃~70℃)
Operating temperature range: -40℃~125℃
Storage temperature range:-40℃~125℃（It is recommended to store at room temperature）
Protection level:IP67
Battery life:More than 5 Years
Sensor Weight:43.4±1g
-500x500.jpg "RS232 External Cap Sensor 8V1 Bus Truck Trailer TPMS Tyre Pressure")
-500x500.jpg "CANbus J1939 TPMS Large Bore Sensor for OTR Tyres CAT Komatsu Mining Vehicles")
