Embedded installation Display Receiver built-in a RS232 Interface bus truck trailer TPMS
Embedded Installation Display Receiver built-in a RS232 Interface bus truck trailer TPMS Tyre Pressure Monitoring System
This hot-selling display receiver tpms kit is greatly welcome both Chinese Domestic market and overseas market mostly installed on buses.
Important:Display receiving units is well buil-in a rs232 port,which is greatly convenient for users to directly handle corresponding telematics integration work,if you want a final RS485 Port,just get an extra connector cable to exchange between RS232 and RS485.
Such an Embedded installation of display receiver is greatly applied to more and more buses,see below pic for reference.
1.Practical Embedded installation, compact and elegant, perfectly match original bus interior decoration without making monitor display always stand up which will occupy more space;
Excellent for buses,display will own a bracket stand with a 3M sticker or directly adopting a type of embedded installation on buses cabins(these two methods of installation optional).
2.Long distance signal reception,good signal stability both transmission and reception.
3.Supports max 18 tires pressure temperature monitoring simultaneously, cycle display tires data.
4. A variety of pressure temperature unit selection.
5.Settable tire high pressure/low pressure/temperature alarm standard value.
6.Low pressure, high pressure, high temperature, leakage and other alarm function integration
Embedded Type of Display Receiver Parameter
Working Frequency: 433.92MHz
Working Voltage: DC5V-DC12V
Maximum Working Current: ≤20mA
Quiescent Current: ≤5Ma
Working Temperature: -40℃-85℃
Communication Baud Rate: 19200Kbps
Receiving sensitivity: >-105dbm
Adopting Freescale chip,Full import car class material, long life, high stability, strong anti-interference ability. Using IP67 protection class, air pressure, temperature measurement, monitoring, and have a self-test and tire leak monitoring.Suitable for all vacuum tires within range.
Sensor Parameter for reference;
Working Voltage：2.1V-3.5V；
Working Frequency:433.92MHz
Tire Pressure Measurement Range:0-13BAR/0-188PSI
Temperature Measurement Range:-40℃-125℃
Working Temperature:-40℃-125℃
High Frequency Modulation Mode:FSK
Transmission Power：＜5dbm
Pressure Measurement Accuracy:±0.2Bar/±2.9PSI
Temperature Measurement Accuracy:±3 ℃
Sensor Weight：32g±0.5g(exclude bandage)
Sensor battery model:CR2450
Sensor battery lifespan: more than 5 years
-500x500.jpg "RS232 External Cap Sensor 8V1 Bus Truck Trailer TPMS Tyre Pressure")
-500x500.jpg "CANbus J1939 TPMS Large Bore Sensor for OTR Tyres CAT Komatsu Mining Vehicles")
