RS232 Truck TPMS Internal Bandage Sensor excellent for GPS GPS Tracker and other Telematics Integration with TX RX Wires connection
RS232 interface TPMS Solution Bandage Sensor for GPS GPS Tracker and other Telematics Integration
Bandage Sensors are more stable and reliable for large vehicles such as mining trucks earthmovers such as Caterpillar and Komatsu vehicles,bandage tie length can be customized for specific application.
Usually for most bus truck vehicles 1680mm bandage length will be enough,but for mining vehicles some are
more than 3 meters or 4 meters in length,if customized bandage tie length required,confirm before your purchase.
1.High quality internal bandage sensor,professional installation and longer lifetime,more reliable and safer.
2.Internal sensor bandage circled and fixed installation
3.Excellent Waterproof function with the help of sensor seal perfect workmanship.
4.Display will show tires data both tire pressure and temperature meanwhile
5.Max Support 22 wheels for bus truck vehicles.
6.With RS232 TX RX Wires Output,can be connected to GPS module or other telematic integration.
If you have your own devices like gps trackers or DVR, and you want to enhance your current hardware which are already installed in vehicles, you can use our TPMS receiver Display unit(built-in wires of TX RX) or Non-display RS232 receiving unit, which will offer TPMS data transmission to your own system via RS232, (if to RS485,a rs232 to rs485 Converter required). With easy installation and simple TPMS data protocol implementation on your own software, you can realize online tire monitoring function also on your own system.
RS232 Receiver Parameter;
Operating frequency: 433.92MHz ±68kHz
Operating voltage: 24V DC
Operating current: ≤20mA
Static current: ≤10mA
Operating temperature: -40 to 80°C
Communication: UART
Baud rate: 19,200kbps
RF receiver sensitivity: ≥105dBm
Repeater(Signal Booster);
Operating frequency: 433.92MHz ±68kHz
Operating voltage: 9-30V DC
Operating current: ≤50mA
Static current: ≤10mA
Operating temperature: -40 to 80°C
Storage temperature: -40 to 125°C
Power supply: trunk power ACC
RF transmitter power: <10dBm
RF receiver sensitivity: ≥105dBm
New Style of bandage sensor built-in hidden antenna for more efficient and reliable installation.
New Design Bandage Sensor Parameter
Battery Mode CR2450(550mAh)
RF Frequency 433.92 MHz±38 KHz
Standby Current:﹤0.7 uA
Emission current:﹤10 mA
High frequency transmitting power:﹤8 dbm（50Ω)
High frequency modulation mode:FSK
Low frequency receiving frequency: 125 KHz±5 KHz
Low frequency modulation mode:ASK
Pressure measurement range: 0-13 bar
Pressure resolution: 2.75 KPa
Pressure measurement accuracy
±0.2 bar(0℃~70℃)
±0.3 bar(-20℃~85℃）
±0.48 bar(-40℃~125℃)
Temperature measurement range:-40℃~125℃
Temperature resolution:1℃
Temperature measurement accuracy:±3℃(0℃~70℃)
Operating temperature range: -40℃~125℃
Storage temperature range:-40℃~125℃（It is recommended to store at room temperature）
Protection level:IP67
Battery life:More than 5 Years
Sensor Weight:43.4±1g
-500x500.jpg "RS232 External Cap Sensor 8V1 Bus Truck Trailer TPMS Tyre Pressure")
-500x500.jpg "CANbus J1939 TPMS Large Bore Sensor for OTR Tyres CAT Komatsu Mining Vehicles")
